-
Patient Monitor Stand
Monitor Stand Mobile,
The main structure is made of high quality aluminum.
Split design makes it easy to assemble and transport
Aluminum all integrated molding base lift-able column.
Castors with two inclusive brakes.
Thin side attachment baskets and handrail
KSh28,000.00KSh35,000.00Patient Monitor Stand
KSh28,000.00KSh35,000.00 -
Patient Stretcher Trolley
Patient Trolley,
It is made from high quality stainless steel, used o transport patient from the ambulance to the respective department and vice versa.
Easy to assemble, with side rail and a drip.
KSh42,000.00Patient Stretcher Trolley
KSh42,000.00 -
Portable LED Pen Torch
A pen light is a small flash light in the shape of a pen. It uses a small light known as LED (light emitting diode).
It also uses a small light bulb made just for small flash light, LED lights up when power is run through it.
LED is strong enough to allow medical professional to safely examine patient without being too bright.
they come with a pupil gauge as well as a 5cm ruler.
The length of each pen is about 5.3 inches.
KSh800.00Portable LED Pen Torch
KSh800.00 -
Portable Oxygen Concentrator
Oxygen concentrator single flow it is an equipment that concentrate the air from the environment purifies it and gives pure oxygen to the patient.
Oxygen purity output 90-95% at all flow levels
Power consumption is 400W
Dimension: Height 24.50 inch
Width: 19.60 inch
Depth: 15.30 inch
KSh70,000.00Portable Oxygen Concentrator
KSh70,000.00 -
PULSE OXIMETER
Pulse oximetry is a noninvasive method for monitoring a person’s oxygen saturation. Though its reading of peripheral oxygen saturation (SpO2) is not always identical to the more desirable reading of arterial oxygen saturation (SaO2) from arterial blood gas analysis, the two are correlated well enough that the safe, convenient, noninvasive, inexpensive pulse oximetry method is valuable for measuring oxygen saturation in clinical use.
In its most common (transmissive) application mode, a sensor device is placed on a thin part of the patient’s body, usually a fingertip or earlobe, or in the case of an infant, across a foot. The device passes two wavelengths of light through the body part to a photodetector. It measures the changing absorbance at each of the wavelengths, allowing it to determine the absorbances due to the pulsing arterial blood alone, excluding venous blood, skin, bone, muscle, fat, and (in most cases) nail polish.
Reflectance pulse oximetry is a less common alternative to transmissive pulse oximetry. This method does not require a thin section of the person’s body and is therefore well suited to a universal application such as the feet, forehead, and chest, but it also has some limitations. Vasodilation and pooling of venous blood in the head due to compromised venous return to the heart can cause a combination of arterial and venous pulsations in the forehead region and lead to spurious SpO2 results. Such conditions occur while undergoing anesthesia with endotracheal intubation and mechanical ventilation or in patients in the Trendelenburg position.
KSh2,500.00PULSE OXIMETER
KSh2,500.00 -
-
KSh23,000.00Reclining High Back Wheelchair With Commode
KSh23,000.00 -
Ripple Mattress – Air Mattress
Ripple Mattress Kenya
A ripple mattress is a special mattress type of mattress that works by inflating air in the cells and alternating the air to each and every cell in the mattress.
The bed-type medical air cushion is composed with two parts: main frame and air cushion. The air cushion has two separate ballonet. Under the control of the main frame every ballonet can touch a different part of the body every six minutes. the fluctuation ballonet can expedite blood circulating to avoid the appearance of the bedsore on the patients who stay in bed for long. so that to cure the bedsore quickly or prevent the sore all together.
Bedsores properly known as pressure ulcers are caused by many factors such as unrelieved pressure, friction, humidity, temperature and medication.
bedsores are fatal however we can prevent it from happening by using a ripple mattress.
KSh8,000.00KSh11,000.00Ripple Mattress – Air Mattress
KSh8,000.00KSh11,000.00 -
Scar Gel Sheet
silicone is effective at both preventing and healing scars,
It works by creating a protective layer over the scar to stop it losing water, damaged skin needs moisture to heal as dry skin tiny cracks at can allow bacteria to enter.
It can slow down healing by causing further inflammation
It is one big sheet that is cut according to the size of the scar, then place the sheet on top of the scar, after some time the scar will vanish
KSh3,000.00Scar Gel Sheet
KSh3,000.00 -
-
-
Stool Containers Kenya
STOOL CONTAINERS
SPIRAL BOTTLE MOUTH: used for enhanced sealing and safety.
CALIBRATION CLEAR: Designed with internal engraving for easy measurement and easier identification.
KSh12.00Stool Containers Kenya
KSh12.00 -
Tape Measure
Tape Measure,
A special tool that physician use to access muscle function following an injury.
It is made from high quality plastic and polystyrene material.
the length starts from 0 to 60 inch.
KSh300.00Tape Measure
KSh300.00 -
-
Urine Containers Kenya
STOOL CONTAINERS
SPIRAL BOTTLE MOUTH: used for enhanced sealing and safety.
CALIBRATION CLEAR: Designed with internal engraving for easy measurement and easier identification.
URINE CONTAINERS
Culture bacteria and cell sterile environment for culture.
Smooth surface optimal transparent body.
KSh12.00Urine Containers Kenya
KSh12.00 -
Ward Screen
A ward screen 3 fold, it is designed to act as a separator in a room,
It is made from stainless steel and has a cover clothing
It can be folded and also portable.
Comes in color blue.
Can be used in hospital, clinic, beauty salon.
KSh8,500.00Ward Screen
KSh8,500.00 -
Autoclave Machine
Autoclaves use steam heat to kill any microbial life that may be present on a contaminated load. considered sterile once it has undergone a full sterilization cycle. Once a load is sterile, it can be used without fear of introducing foreign microorganisms into a sensitive environment, such as a laboratory, hospital operating room, food production facility, and so on.
In order to kill a cell with heat, its temperature must be raised to a degree at which the proteins in the cell wall break down and coagulate. Steam is a very efficient medium for heat transference, which makes it an excellent way to destroy microbes. Air, on the other hand, is a very inefficient way to transfer heat/energy because of a concept known as the heat of vaporization.
That energy is what makes steam so much more efficient at destroying microorganisms. When steam encounters a cooler object, it condenses into water. Then, it transfers all of the energy that was used to boil the water directly into the water. This process heats up the cells far more efficiently than air at similar temperatures. This is why we use steam to achieve sterility.
Sterilization cycle
1. Purge Phase: Steam flows through the sterilizer and starts to displace the air; temperature and pressure ramp slightly to a continuous flow purge.
2. Exposure (Sterilization) Phase: During this phase, the autoclave’s control system is programmed to close the exhaust valve, thereby causing the interior temperature and pressure to increase to the desired setpoint. The program then maintains the desired temperature (dwells) until the desired time is reached.
3. Exhaust Phase: Pressure is released from the chamber through an exhaust valve and the interior is restored to an ambient pressure (though contents remain relatively hot).
KSh20,000.00Autoclave Machine
KSh20,000.00
