Infant Radiant Warmer BN-100

Infant radiant warmer BN-100, It is a body warming device to provide heat to the body.

It helps to maintain the body temperature of the baby and limit the metabolism rate.

Heat has a tendency to flow in the heat gradient direction that is from high temperature to low temperature,

heat loss in some newborn babies is rapid

hence baby warmer provides an artificial support to keep the body temperature constant.

It consists of an open tray and the artificial heating is provided by a heating mechanism mounted overhead,

the heating mechanism consists of quartz which produces the desired heat and a reflecting mechanism

to divert the heat at the baby tray.

The skin temperature of the baby can be monitored by a temperature of the baby

can be monitored by a temperature measure knob that is kept continuously attached to the body.

The variation in the skin temperature can be seen on a small LCD panel

which continuously shows the body temperature.

They are equipped with alarms to indicate the change in the temperature

and hence attract the attention of medical professionals attending the baby.

The heat generated can be controlled manually by a knob

as well as automatically depending on the radiant heat warmer.

It can be manual or automatic (servo system heater output is determined automatically

based on skin temperature the skin temperature is set at 36.5 degree celsius)

The heat generated and the temperature of the skin can be individually seen

but the basis difference between these two models will be the regulation of temperature

The automatic model increases the heat output in small predetermined

steps to reach at the desired temperature of the body.

Function features of an Infant radiant warmer

Microprocessor based servo controlled temperature system

The microprocessor-controlled unit allows for two modes: manual and automatic

Set temperature and skin temperature are displayed by LED

Alarm functions: power failure, temperature deviation, temperature sensor failure, skin temperature failure, over temperature

A second thermal cut-out function for more safety

Adopts anti-explosion micro crystal quartz infrared radiation tube

Four transparent protector folded with 2 infusion seals

Rs-232 connector

Main Technical Parameter Infant radiant warmer

Model:  BN-100

Power supply: AC22V±22V;  50Hz±1Hz

Power input: 1000VA

Temperature control range: 32°C∼38°C at least

Temperature control accuracy ≤0.5°

Warm-up time ≤45min

Over temp alarm: 39°C (cut off heater power) Audible and visual alarm

Second heater cut-off device over-temperature alarm: 40°C (cut off heater power) Audible and visual alarm

Deviation Alarm: After the temperature reaches equilibrium there will be audible and visual alarm when the deviation is ±1°C

Sensor failure alarm: When the skin temperature sensor has an open circuit or a short circuit the heater will be cut off and an audible and visual alarm will be issued.

Power interruption alarm: Power interruption, audible and visual alarm

Uniformity of bed surface temperature: ≤2°C

Skin temperature sensor accuracy: ≤0.3°C

Order this Infant radiant warmer bn-100 from MJ Hospital Supplies today and get free delivery.

You can also follow us on our: Facebook Page: Mj Hospital Supplies for more updates.

Instagram Page: Mj Hospital Supplies

Pinterest page: https://www.pinterest.com/mjhospitalsupplies/

Linked in page: Mj Hospital Supplies 

Twitter Page: https://twitter.com/medjethospital